The M1 Mini N100 Pro supports four quick-access M.2 2280 or 22110 drives. The bays are not hot-swappable, so power the system off before changing a drive.
Only PCIe/NVMe M.2 drives with one keying notch are supported. SATA M.2 drives with two notches are not supported.
Drive order
- Red drive-light version: install drives in the order 2, 1, 3, 4.
- Blue drive-light version: install drives in the order 1, 2, 3, 4.
Installation
- Power off the system and open the magnetic front cover.
- Remove the required quick-access tray.
- Remove the tray screws and open the cover.
- Locate the drive in the tray notch and adjust the thermal pad for the drive length.
- Slide the retaining clip to the end of the drive and close the cover.
- Fit the screw in the matching length hole and reinstall the tray.
Comments